![]() ![]() ![]() Carefully lower the enclosure over the Mac Pro being careful not to touch any of the circuit boards.Press the RAM bay back into place after installing all DIMMs.Do NOT bend or twist the DIMM during insertion.Do NOT insert DIMMs while the DIMM mechanism is in the locked position.Do NOT rock the DIMM into the seated position.If the DIMM doesn't insert, verify that the key (D) and notch (E) are aligned. Insert gently until bottom edge of DIMM is touching the gold contacts, then apply more force to fully seat the DIMM.Insert the DIMM at the angle determined by the open DIMM mechanism.Ensure horizontal alignment of the DIMM prior to applying any force. ![]() Gently hold the DIMM ends and insert it into the slot.Note: Keep the can vertical to avoid spraying propellants onto the DIMM slots. If available, use canned air to blow dust and other contaminants out of the DIMM slot.Locate the DIMM slot closest to the interior of the computer and confirm that no DIMM is there.Note: The key/notch position is different on each side of the computer. Each DIMM (F) has a notch (E) that must line up with the key (D) inside of the DIMM slot (C).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |